SN65LVDS93B: About How to Bridge HDMI/DVI to LVDS/OLDI

Tsukui Yusuke

Guru 21930 points

Part Number: SN65LVDS93B
Other Parts Discussed in Thread: TFP401PZPEVM, , TFP401A, LVDS83BTSSOPEVM, DS90C385A

Hi,

We are considering a circuit that converts DVI to LVDS.
Then, Customer read the following TI document and plan the structure of the attached image.

How to Bridge HDMI/DVI to LVDS/OLDI
https://www.ti.com/lit/an/slla325c/slla325c.pdf

Against this background, Customer is going to perform pre-evaluation and verification using the following EVM.
・TFP401PZPEVM：https://www.ti.com/tool/TFP401PZPEVM
・SN65LVDS93B：Non EVM

１．Could you tell me SN65LVDS93B EVM that could be used for pre-evaluation?
２．Could you introduce the connector and bridge board for connecting TFP401A EVM and SN65LVDS93B?

Best regards,
Yusuke

over 3 years ago

0 Aaron Heng over 3 years ago

TI__Mastermind 31600 points

Hi Yusuke-san,

Unfortunately, we do not have the SN65LVDS93B EVM. I need to check if the LVDS83BTSSOPEVM can be used for in place of SN65LVDS93B. I also need to investigate if you can use the DVI to LVDS converter.

Aaron

0 Tsukui Yusuke over 3 years ago in reply to Aaron Heng

Guru 21930 points

Hello Aaron-san,

Thank you for your response and kind support.
>I need to check if the LVDS83BTSSOPEVM can be used for in place of SN65LVDS93B. I also need to investigate if you can use the DVI to LVDS converter.

I look forward to hearing back from you.
Customer wants evaluation board information.
Could you provide details including LVDS83BTSSOPEVM using with SN65LVDS93B.
And Please tell me how to connect it to TFP401PZPEVM.

Best regards,
Yusuke

0 Aaron Heng over 3 years ago in reply to Tsukui Yusuke

TI__Mastermind 31600 points

Hi Yusuke-san,

Sorry for the delayed. I am still looking at this. I will get back to you by the end of this week.

Aaron

0 Aaron Heng over 3 years ago in reply to Aaron Heng

TI__Mastermind 31600 points

Hi Yusuke-san,

Unfortunately, there is no EVM available for SN65LVDS93B; however, it looks like the DS90C385A has the same pin out and package type DGG. You can order the DS90C385A EVM and replace it with SN65LVDS93B.

DS90C385A EVM:

Regarding the DVI to LVDS converter using TFP401A, you can bridge them together with SN65LVDS93B.

Aaron

Interface

Interface forum

SN65LVDS93B: About How to Bridge HDMI/DVI to LVDS/OLDI