TCAN330G: Clarification of Common Mode choke

Kumar Sivaraman

Part Number: TCAN330G

Hi,

In the eval board for TCAN330G (TCAN EVM User Guide) there is NO available.Kindly share teh BOM for the same or share the part number for L1 common Mode choke which is used for EMC Environment.

Regards

Kumar

over 3 years ago

0 Eric Schott1 over 3 years ago

TI__Guru 50555 points

Hi Kumar,

I believe the part on the EVM represents a generic footprint and does not include a part number on the BOM. Some commonly used chokes for these devices are ACT45C-510-2P, ACT45B-510-2P, or other values from that series of chokes. The inductance value you choose will depend on how much noise you expect and will need to attenuate.

Let me know if you have any other questions.

Regards,
Eric Schott

0 Kumar Sivaraman over 3 years ago in reply to Eric Schott1

Prodigy 50 points

Thanks for the clarification

Interface

Interface forum

TCAN330G: Clarification of Common Mode choke