• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 184 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD30-EP: Figure 7. Driver High-Level Output Current vs High-Level Output Voltage

Thomas Stephenson
Prodigy 20 points
Part Number: SN65HVD30-EP

Figure 7. Driver High-Level Output Current vs High-Level Output Voltage appears to be incorrect. The scale seems off by a factor of 10. The Voh at 2.4V per table 7.6 is -8ma, Figure 7 appears to list -0.08 A or -80mA. Please clarify.

  • 0
    TI__Guru 67572 points

    Thomas,

    Thanks for bringing this to E2E. Figure 7 is the plot for the Driver high level current, so the lower limit would actually be -60mA. That being said, this number in the table is for the steady-state current once the voltage is in the high state. The plot shows the transient current consumption when the voltage output is ramping up or down.

    Please let me know if you have any other questions.

    Regards,