• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953-Q1EVM: what script input or register setting for waveform output continuously

Takao Yamamoto5
Expert 1690 points
Part Number: DS90UB953-Q1EVM

Dear team,

Could you teach me what should I input script or how should I set registers to achieve following?

I want to measure this LVDS waveform by oscilloscope for evaluation.

To focus on setting oscilloscope function, I want to set this EVM to output some waveform continuously.

Best regards,

  • 0
    TI__Genius 11340 points

    Hi  Yamamoto,

    Are you using a deserializer EVM as well?

    If there's lock between the des and the 953 in coax mode, you can probe the LVDS signal on Dout- on the 953. Or you can check the CMLOUT signal on the deserializer.

    Best,

    Jiashow