Hi team,
My customer is using TPD6S300RUKR and is confused about the RPD_G1 and RPD_G2 pins. Their device gets power from USB VBUS, but it is not a mobile device and does not have a battery. But it seems in order for it to get VBUS power, they think they need to connect RPD_G1 and RPD_G2 to C_CC1 and C_CC2 as shown in the data sheet.
The datasheet also says: If dead battery charging is not required in your application, connect the RPD_G1 and RPD_G2 pins to ground.
But they are thinking this would apply only to devices that have a power source other than USB VBUS.
Is this assessment correct?
Thank you in advance for you support!
Errol