• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 118 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVPE501: What's the trace length supported by SN65LVPE501

Max Guan
Intellectual 1350 points
Part Number: SN65LVPE501

Hi team,

What's the trace length supported by SN65LVPE501 at input side and output side?

I did not find the specified value in the datasheet.

Thanks

  • 0
    TI__Guru* 91440 points

    Hi Max,

    This depends on your transmission media loss performance. Please note table 7 of the data sheet. Device supports 15dB gain at Nyquist (2.5GHz). With 15dB gain and signal launch amplitude, you should check to make sure this meets your receiver input sensitivity - given insertion loss of the media.

    Regards,, Nasser