Other Parts Discussed in Thread: TUSB8041, TUSB522P
Hi TI team ,
We are using the TUSB8041-Q1 together with the TUSB522 . On the USB2 P1 we have the MCP2221A .
We are facing some intermediated connection problem on the USB 3 only , The USB 2 works fine .
When connecting our board(HUB) to the PC (HOST) we can see the connection and after a few seconds the hub is disconnected .
If we are connecting our board(HUB + Re-driver ) to the pc through another HUB (of the shelf) its working fine .
We are using an EEPROM for configuration , but already disabled it and try to use the on board strap's , it didn't help.
Also, we override the re-driver ,it didn't help .
I am attaching part of our schematics for review
Please advise .
Thanks in advance