This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS25810-Q1
I would like to design automotive media port. So I interest in reference design TIDA-00987.
And I have a question.
If i set TPS254900 to client mode (CTL1=0,CTL2=0). OUT of TPS254900 connected EN of TPS25810 like a reference design schemetic.
TPS25810 can be controled by external signal?? (on/off)
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Yongqiang Sun:
Could I even make to enable TPS25810 if I use external signal(H) on EN pin of TPS25810?
I don't need to use current limit so I selected client mode.
In reply to Mason Noh:
Yes, I also think you can use an external GPIO to enable the TPS25810.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.