TDP158: Programming sequence available ?

Steffen Graessle

Part Number: TDP158

Dear members,

can anybody point me to where I can find the configuration data for the TDP158?

I assume there must be some configuartion data available, which I can use to program the TDP158 on the evaluation board, via Advaark, or via USB?

Kind regards

Steffen

over 4 years ago

0 Ikechukwu Anyiam over 4 years ago

TI__Mastermind 35130 points

Hi Steffen,

If you have the evaluation board you can just use the Eyescan tool: http://www.ti.com/lit/zip/sllc455

Here is the userguide: http://www.ti.com/lit/ug/sluubk2/sluubk2.pdf

Regards,

I.K.

0 Steffen Graessle over 4 years ago in reply to Ikechukwu Anyiam

Prodigy 120 points

Hi Anyiam,

I don't have the evaluation board available. I want to program the TDP 158 in my custom design via I2C, by using a Micro-Controller.

Thererfore I just need the configuration data.

The links which you point me to cntains the tool to program the TDP158 via I2C, but it doesn not contain any configuration data for the TDP158, or am I wrong?

Kind regards

Steffen

0 Ikechukwu Anyiam over 4 years ago in reply to Steffen Graessle

TI__Mastermind 35130 points

Hi Steffen,

Understood. Unfortunately we don't have configuration data to share. You will need to reference the register map in the datasheet to program your device for your application.

Regards,

I.K.

Interface

Interface forum

TDP158: Programming sequence available ?