This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: DS250DF230
when i use IBIS files on SigXplorer software , it returns
ERROR - Code file ds250df230_rx_x64.so not found. It was defined in [Algorithmic Model] for Model ds250df230_rxattached sreenshot :
but this file is located in my directory
can you help me ? thanks.
We suspect that the name of the file is incorrect. It is possible that the person on our side who compiled the linux model named it incorrectly.
You should change the ".so" file name to ds250df230_rx_x64.so. There are two places where you will need to correct it within the TI folder path:
HSSC Applications Engineer
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.