Part Number: TPS37100-Q1
Hi,
Currently I'm using discrete approach to monitor the battery rail for overvoltage and undervoltage faults and I'd like to understand is there a single package solution, which can help solution cost and size?
Best Regards…
Part Number: AM13E23019
Hi experts,
Is early brownout detection (with interrupt) possible? How to configure thresholds?
"7.8.1 Power Management Unit (PMU): section in datasheet mentions "Brownout reset (BOR) supply monitor with early warning capability…
Part Number: AM13E23019 Other Parts Discussed in Thread: SYSCONFIG
Hi experts,
I wanted help with the Timer module configuration of the AM13E30x sysconfig. I open the example.syscfg and try to configure the timer, but notice the following issues:…
Part Number: TMS320F280033 Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH
The default boot to flash entry point is 0x80000 in the F28003x Boot ROM, which is not in the memory map for the F280033/F280034 subset parts. This thread will detail how…
Part Number: INA241A
I am looking for a high voltage, precise current sense amplifier and both the INA241 and the INA296 families meet my design requirements. I see that the INA241 has a PWM reject feature like the INA750 and INA790. How do I decide…
Other Parts Discussed in Thread: C2000WARE
This thread will discuss the best practices for custom bootloading on the following devices:
F2807x
F2837xS
F2837xD
F28004x
F2838x
F28002x
F28003x
F280013x
F280015x
F28P65x
F28P55x …
Part Number: INA240
What Size Resistors should be used with the INA240?
Can a voltage divider be used to drive the reference input of the INA240?
Why does the output of the INA240 seem distorted compared to the measured current?
Part Number: TMCS1126
How do I calculate the Ioc and Voc thresholds?
What is the range of the overcurrent?
Is the overcurrent for both the positive and negative current?
Do you have a tool to calculate the Ioc and what value I need to apply on…
