Part Number: TPS37100-Q1
Hi,
Currently I'm using discrete approach to monitor the battery rail for overvoltage and undervoltage faults and I'd like to understand is there a single package solution, which can help solution cost and size?
Best Regards…
Part Number: AM13E23019
Hi experts,
Is early brownout detection (with interrupt) possible? How to configure thresholds?
"7.8.1 Power Management Unit (PMU): section in datasheet mentions "Brownout reset (BOR) supply monitor with early warning capability…
Part Number: AM13E23019 Other Parts Discussed in Thread: SYSCONFIG
Hi experts,
I wanted help with the Timer module configuration of the AM13E30x sysconfig. I open the example.syscfg and try to configure the timer, but notice the following issues:…
Part Number: TMS320F280033 Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH
This thread will detail how to modify the boot to flash entry point to 0x88000 for F280033 and F280034 devices by programming the DCSM OTP. The default boot to flash entry…
Part Number: INA241A
I am looking for a high voltage, precise current sense amplifier and both the INA241 and the INA296 families meet my design requirements. I see that the INA241 has a PWM reject feature like the INA750 and INA790. How do I decide…
Other Parts Discussed in Thread: C2000WARE
This thread will discuss the best practices for custom bootloading on the following devices:
F2807x
F2837xS
F2837xD
F28004x
F2838x
F28002x
F28003x
F280013x
F280015x
F28P65x
F28P55x …
Part Number: INA240
What Size Resistors should be used with the INA240?
Can a voltage divider be used to drive the reference input of the INA240?
Why does the output of the INA240 seem distorted compared to the measured current?
Part Number: TMCS1126
How do I calculate the Ioc and Voc thresholds?
What is the range of the overcurrent?
Is the overcurrent for both the positive and negative current?
Do you have a tool to calculate the Ioc and what value I need to apply on…
