Hi, all
1. both CDPEN1 and CDPEN2 must be pull high or low together, is it right? Can CDPEN1 and CDPEN2 be floated ?
2. if CDPEN1=high and CDPEN2=low, can ISOUSB211 still work?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, all
1. both CDPEN1 and CDPEN2 must be pull high or low together, is it right? Can CDPEN1 and CDPEN2 be floated ?
2. if CDPEN1=high and CDPEN2=low, can ISOUSB211 still work?
Hi Ken,
Thanks for reaching out, please find my inputs below.
Please refer to the below example diagram where CDPENZ2 is made LOW to enable CDP advertising on the downstream facing side enabling 1.5A of current to the peripheral. Thanks.
Regards,
Koteshwar Rao