[ SN74LVC1G126-Q1 ] Tpd distribution and/or statistical data

Hi Kenichiro,

What voltage are you planning to operate at?

For now I can refer you to the Typical Charactersitics section on page 7 of the SN74LVC1G126 datasheet. There you will find two plots that show tpd for various load capacitance. This is the non-Q1 version but the parts are essentially the same.

Hope this helps.

Regards,

Joe

Hi Ken,

The Q1 version is essentially the same part as the non-Q1, so the figures on page 7 of the the SN74LVC1G126 datasheet are accurate and can be used. This data was tested for 3V +/- 0.3V.

How is the part going to be operated? You mentioned 3.3V power supply, but are there other operating conditions that need to be concidered, such as temperature? Is there a maximum propagation delay for the system that the customer is worried about?

Depending on the load capacitance the part sees, the typical propagation delay can range from ~2.5 ns to ~7.5 ns (low to high transition) and ~2ns to ~5ns ( high to low transition).

Please provide more detail.

Thank you,

Joe