• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AHC1G126-EP: Output state until minimum VCC reaches during power up

Cedrick
Expert 8270 points
Part Number: SN74AHC1G126-EP

Hi,

Good day.

Our customer is using the SN74AHC1G126-EP and they have this inquiry below:

During power up (slow rise of power), what will be the output state until minimum VCC limit is reached? Will it be output state 'Low' or output state 'High impedance'?

I have LED drive circuit in my design which is active low and driven from +28V DC line. So i want to ensure until minimum power supply reaches, the control circuit does not enable it with default output state as 'Low'.

Can you please help us with this?. Thank you.


Regards,

Cedrick