Hello team e2e,
I am trying to run a basic simulation using the SN74BCT760 Spice Model available on ti.com (https://www.ti.com/lit/zip/scbm122). Ideally, trying to implement and verify the buffer logic -->
Here are the simulation screenshots along with transient analysis -->
The problem is the curve VF1 (output Y of the buffer), which should ideally follow the curve VG2 (A input) whenever the OE not pin is low (Should pass the data without change right ?).
Please let me know the understanding which I might be missing here. Attached you will also find the TINA TI file.
Thanks,
Anubha
