Hi Team,
How much is the supply power's current about the max. and typ. value?
The output currents are given only, but the supply current is not.
Regards,
Haury
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
How much is the supply power's current about the max. and typ. value?
The output currents are given only, but the supply current is not.
Regards,
Haury
The Recommended Operating Conditions table does not show any characteristics of the device; it limits what your circuit is allowed to do. This table says that you must not try to draw more than 32 mA from an output (or the electrical characteristics are no longer guaranteed, and the device might not work correctly).
The supply current specification can be found in the Electrical Characteristics table.
Hi Clemens,
Thanks for your prompt feedback.
It seems that the supply current isn't shown in the Electrical Characteristics table (Section 6.5 in the datasheet)
Could you kindly help to check the current?
Regards,
Haury