SN74AUP1G08: Package weight

Hiroaki Yuyama TED

Part Number: SN74AUP1G08

Dear, Support Team.

Our customer asked about the weight of the SN74AUP1G08DCKR.
I've been looking into it, but the PACKAGE OUTLINE in the data sheet did not include the weight.
In addition, I looked at the TOTAL weight of Amount (mg) from Quality, reliability & packaging information.
The weight is TOTAL 213.905430mg, but is it the weight of the SN74AUP1G08DCKR package?
www.ti.com/.../report

Best Regards,
Hiroaki Yuyama

over 1 year ago

0 Jack Campbell over 1 year ago

TI__Intellectual 1100 points

Hi Hiroaki,

I have reached out to our quality team to confirm the weight for that device and will get back to you on this as soon as possible.

0 Albert Xu1 over 1 year ago

TI__Mastermind 23155 points

Hi Hiroaki-san,

We were able to track down the issue of this device. The SN74AUP1G08DCKR just underwent a PCN this past year where SN finish was added to the possible finishes. The SN lead finish is new to this OPN so the information on the website seems to not be updated fully yet. I am trying to see if I am able to find the correct weight for this device, but the weight should not be too different from the others. ~6-7 mg most likely.

+1 Hiroaki Yuyama TED over 1 year ago in reply to Albert Xu1

Expert 1400 points

Hi Albert-san, Jack-san,

Thank you for your reply.
I understand that SN74AUP1G08DCKR is plus 6~7mg even with SN lead finish.
If we know the weight of the device, we read it from the reliability data.

Best Regards,
Hiroaki Yuyama

Logic

Logic forum

SN74AUP1G08: Package weight