I want the chip enables always active. Is it OK to tie those pins directly to ground, or do I need to use a pulldown resistor? I've never used BCT parts before and I cannot find any drawings that show the input structure.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I want the chip enables always active. Is it OK to tie those pins directly to ground, or do I need to use a pulldown resistor? I've never used BCT parts before and I cannot find any drawings that show the input structure.
You can tie directly to ground.
Best,
Malcolm