why is it not redommended to use pullup and pulldown registors?
I recognize bus hold circuit as a circuit as shown in the figure 1.
Is it omitted in the logic diagram?(figure 2)
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
why is it not redommended to use pullup and pulldown registors?
I recognize bus hold circuit as a circuit as shown in the figure 1.
Is it omitted in the logic diagram?(figure 2)
The bus-hold circuit already works like a pull-up/-down resistor. An external pull-up/-down resistor would either pull in the same direction (so it would not be needed) or in the opposite direction (so it would form a voltage divider and make the input voltage invalid).
The logic diagram is just an overview; the bus-hold circuits are still there.