SN54LVTH574-SP: Rad Hard?

Uriel Berchin

Prodigy 120 points

Part Number: SN54LVTH574-SP
Other Parts Discussed in Thread: SN54AC00-SP

I am looking for radiation data for the SN54LVTH574-SP.

5 months ago

0 Albert Xu1 5 months ago

TI__Mastermind 22365 points

Hi Uriel,

Unfortunately, for some of our older parts (this device is 20+ years old) we do not have documentation for them.

0 Uriel Berchin 5 months ago in reply to Albert Xu1

Prodigy 120 points

Thank you for your answer.

Do you know of any F-F that can work at 150MHz and is Rad Hard?

0 Albert Xu1 5 months ago in reply to Uriel Berchin

TI__Mastermind 22365 points

Hi Uriel,

By Radiation Hardened are you looking specifically for a device that has current documentation?

0 Uriel Berchin 5 months ago in reply to Albert Xu1

Prodigy 120 points

Yes.

I order to be allowed to use a part in our designs, we need to have radiation documentation or inclusion in an approved list (e.g.: TOR, etc.)

0 Albert Xu1 5 months ago in reply to Uriel Berchin

TI__Mastermind 22365 points

Hi Uriel,

Do you know the specific radiation needs?

For example, is radiation "tolerant" enough or does it need to have radiation "hardened"

If the device needs to be radiation hardened, we do not have many choices in this. Anything in our "AC" family is considered radiation hardened based off the SN54AC00-SP report here. However, the AC family only has a 2-ch DFF: https://www.ti.com/product/SN54AC74-SP

We do have newer devices coming our as we are looking to refresh out SP and EP parts in the upcoming year. Currently we also only a 2-ch DFF for our new SC family: https://www.ti.com/product/SN54SC2T74-SEP

We are planning on making larger channel devices ranging from 4-8ch in the future, but I cannot give you an exact timeline of this.

Do note that, our new SEP (SC family) devices are rated as radiation tolerant at 50krad.

Logic

Logic forum

SN54LVTH574-SP: Rad Hard?