Tool/software:
Hi team，
TXS0102DCUR's VCCA=1.8V, VCCB=3.3V, is there any problem with OE using 3.3V level control?
I see that the voltage level of OE is referenced to VCCA, so I recommend that customers use 1.8V for OE.
But I see that the voltage level is within 5.5V here on DS, so is there any risk if customers actually use 3.3V voltage level to control OE? Or do we still recommend using 1.8V to power OE?
Or customers can still use 3.3V and then use resistor voltage division to achieve 1.8V control of OE.
