Other Parts Discussed in Thread: TXU0101, 2N7001T
Tool/software:
Is there an equivalent device that does not have an internal pull-up?
Unidirectional is fine, not bidirectional.
The background of my inquiry is as follows,
We want to shift the UART signal voltage from 1.8V to 3.3V at 115.2kHz.
We verified the operation of the TXS0101DCKR, which has a proven track record in our company, but the system stopped working.
After isolating the cause of the problem, it was found that the problem was caused by an internal pull-up.
We are looking for a device that does not have an internal pull-up.
