Other Parts Discussed in Thread: SN74LVC2T45, TXB0102, TXS0102Hi Shreyas,
My customer used SN74LVC2T45 as level shift in their system. However, they met the same problem as the input slew rate is too small and output start to ringing. they've tried smaller pull up resistor, but still can't meet the requirement. they need the device to do the level shift and the signal is bidirectional. (3.3V and 5V, 2 bits, controlled bidirectional). could you please advice if there's any device can meet the requirement? or any work around to solve the problem? thanks.
I'm also thinking about adding a buffer with schmitt trigger before the level shift, but buffers are all single direction.
BR,
Mike