Other Parts Discussed in Thread: SN74AUC244, SN74LVC244A, SN74AUC245
Dear experts,
Customer is looking for re-driver to connect SD card 6 pins (Data0~3, CMD,CLK).
Currently, they have problem with High speed(200MHz) communication due to long line trace for board to board connection .
I recommended SN74AUC07 but it's size is 3.5x3.5. customer said it is big..
Required data rate : 200MHz over, smaller size, 6 pin re-driver.
Would you recommend smaller device for this application ?
Thanks,
JH Seo.