Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 447 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TX517: TX517 CW Mode

Oliver Werther
Prodigy 40 points
Part Number: TX517

if the TX517 will not be used in the CW Mode, could you please confirm that the following input and supply configuration is correct?

- weak pull down (ext R) to gnd on VCWA, VCWB

- GNDCW, GNDCWA, GNDCWB connected to GND

- PDM\ = High

- CWINA, CWINB = low

Thank you.