• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 288 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVTH16244A: the input Tr/Tf：113us/V for 16244

Frank Xiao
Genius 12055 points
Part Number: SN74LVTH16244A
Other Parts Discussed in Thread: SN74LVT16244B

Hi team,

My customer is using the device SN74LVTH16244ADGG now. But the input Tr/Tf：113us/V， but the datasheet can only accept Tr/Tf：Max 10ns/V. Do we have some methods to do P2P replacement to solve the problem?

Thanks.

  • 0
    TI__Guru* 96681 points
    Hi Frank,
    There is no replacement that fixes this issue.

    The correct solution is to fix the signal integrity problem. Why is their input signal so slow?
  • 0 in reply to Emrys Maier
    TI__Genius 12055 points

    They didn't notice the problem before. The input is from a OD gate. Thanks.

  • 0 in reply to Frank Xiao
    TI__Guru* 96681 points

    That's probably a bigger issue for them since the LVTH has bus-hold circuits on the inputs that will compete with the pull-up resistors required by the open-drain devices.

    They will need to either swap the pull-up to a very low value to make it stronger, reduce the capacitance on the trace, buffer the signal, or swap to a non-bus-hold part such as the SN74LVT16244B.  The inputs to this device are still CMOS, so the input speed requirement is still there, but there will be less of a problem because bus-hold is removed.