• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 1634 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G11-EP: SN74LVC little logics

user4345944
Intellectual 290 points
Part Number: SN74LVC1G11-EP

Hi, 

I have some questions regarding the protection circuit (if there are any) for the little logic family:

  • Question 1: Are there input protection diodes integrated in the SN74LVC components, to DGND and to VCC ?
  • Question 2: Can we have the equivalent circuit of an SN74LVC component input port ?
  • Question 3: Are there output protection diodes integrated in the SN74LVC components, to DGND and to VCC ?
  • Question 4: Can we have the equivalent circuit of an SN74LVC component output port?

Thanks and regards

Annais

  • 0
    Guru 297090 points

    LVC inputs have protection diodes only to ground, and are overvoltage tolerant:

    LVC outputs have IOFF protection, and protection diodes to both VCC and GND (the images below show only one feature each):

       

  • 0 in reply to Clemens Ladisch
    TI__Guru 62930 points
    Thanks Clemens.
    Annais,
    This can also be inferred from the absolute max table.
    The VI spec does not included a VCC component to max voltage. (such as Vcc +0.5 as one would have with traditional diode to VCC)
    The output diode can be seen from the Vo spec, as it has Vcc +0.5 in the abs max table.

    Regards,
    Wade