Hi,
Are there any concerns if the output port is pulled up to VCC with a pull-up resistor?
SN74AUP1G14 supports the partial power down(Ioff). So, I believe that there aren't any concerns if the value of pull-up resistor is large.
Best regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Are there any concerns if the output port is pulled up to VCC with a pull-up resistor?
SN74AUP1G14 supports the partial power down(Ioff). So, I believe that there aren't any concerns if the value of pull-up resistor is large.
Best regards,
Kato