The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD4010B: CD4010BQDRQ1 - Power Supply

Part Number: CD4010B


We are using CD4010BQDRQ1.

In datasheet,it is recommended that VDD > VI > VCC.

If I use 5V at both VDD and VCC.Does it creates any impact.

Thanks in Advance.