Hi All,
In my Project I am using one 16 bit level translator SN74LVC16T245MPWREP, one 8 bit level translator SN74LVC8T245MPWREP, one 2 bit level translator SN74LVC2T45MDCTTEP in which signals are connected to a Micro D connector for both Inputs and outputs. My questions are
- If the connector is not mated with other system, will the I/Os are in Hi-Z state.
- If they are in Hi-Z state, Is it safe to remain it in same state or I should define the state of the I/Os by pulling up or down.
- In the datasheet of SN74LVC2T45MDCTTEP, I am unable to find Ɵjb and Ɵjc values.Can you Please provide the values.
Thanks,
Jayanth