This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

SN74AUP1G07 for I2C clock buffer

Intellectual 300 points

Replies: 1

Views: 441

Hi,

Can I use the SN74AUP1G07 for I2C clock bus with 100KHz?

Stanley

  • 100 kHz corresponds to 10 µs. The switching characteristics (section 7.6–7.9 of the datasheet) show delays of less than 0.025 µs; if your bus has a higher capacitance, scale appropriately.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.