Other Parts Discussed in Thread: SN74LVC1G175
I am looking to use the subject buffer to drive a 3V LED inside a Solid State Relay. Why are there 2 output current specs for a 3V supply? What are the condition differences that will result in one current output over the other?
For instance can you state why in table 7.3 Vcc =3V there are two current levels specified for Ioh? Also for table 7.5 with Vcc = 3V why are there two voltage ranges given (obviously this has to do with the currents but please explain)?
Also does TI offer a 3.3V buffer with a 3.0V min voltage output?