DK-TM4C129X: Display Not Working

Hello Arjunan,

You mention receiving this kit on 18-07-2020, how often has it been used since arrival?

Regarding the missing items I believe we need to update the kit list on TI.com still, I will look into that. There are a few items not being included now but I don't recall specifically which ones they are. I will verify and then get the website updated.

Best Regards,
Ralph

Sorry typo, It was received on 18-07-2021,

I had tested the kit on 19-07-2021

soon after testing I posted the status to mouser - distributor and got routed to TI forum

Hello Arjunan,

It sounds like a defective screen to me but to be sure have you tried loading the blinky project to ensure the board is being programmed correctly and can execute code?

The other example I'd recommend to try is the hello_widget example.

Best Regards,

Ralph

Hi Ralp,

I tried the following examples

1. hello_widget -  not working

2. qs_Weather - not working

3. uart_echo - working

4. pwmled_DK_TM4C129X_TI - working

5. mutex_DK_TM4C129X_TI - working

6. gpiointerrupt_DK_TM4C129X_TI - working

The controller is working in  debugging mode as well as from flash memory.

thanks

Arjunan Anandan