TMS570LS0432: LAUNCHXL-TMS57004: Project 0 and other sample code

Cedrick

Part Number: TMS570LS0432
Other Parts Discussed in Thread: LAUNCHXL-TMS57004

Hi,

Good day.

Our customer is looking for the project 0 for the LAUNCHXL-TMS57004. Also, for other sample codes for this device.

Can you please help? Thank you.

Regards,

Cedrick

over 2 years ago

0 Chester Gillon over 2 years ago

Guru 92251 points

6.1. Project 0 has the link to the source code for project 0, and other example code.

0 Cedrick over 2 years ago in reply to Chester Gillon

TI__Expert 8270 points

Hi Chester,

Thank you for this.

Our customer has a follow up question, kindly see below:

I was finally able to download and debug the demo code onto the development board.
However, when I try to download the same code into my own board, I get an error.
A client has been working with the same board for a year, but when I try to download I get an error.
Can you tell me what the error means?
I use the same processor (TMS5700432BPZQQ1) but the XDS110 probe instead of XDS100v2, which I set in Properties. And it connects fine.

Here is the error message:

"Dap: Error connecting to the target: (Error -242 @ 0x0) A router subpath could not be accessed. The board configuration file is probably incorrect. (Emulation package 9.5.0.00143)"

Here is a new error from the same setup without any changes:

CortexR4: Error connecting to the target: (Error -6305) PRSC module failed to write to a router register. (Emulation package 9.5.0.00143)

Regards,

Cedrick