TM4C129XNCZAD: Migrating firmware from TI compiler to Arm GCC compiler

Chiranth Murthy

Part Number: TM4C129XNCZAD
Other Parts Discussed in Thread: SYSBIOS

Hi ,

I am using TIRTOS with TI compiler , i have firmware based on ti complier , I need to convert it to compile on arm gcc compiler . Can anyone suggest be some links that I can refer to.

thanks in advance

-Chiranth

over 2 years ago

0 Ralph Jacobi over 2 years ago

TI__Guru*** 135135 points

Hello Chiranth,

See this FAQ on the topic with a PDF resource: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/947278/faq-where-can-i-find-material-on-gcc-support-with-ti-rtos-sys-bios-for-cortexm-devices

Best Regards,

Ralph Jacobi

0 Chiranth Murthy over 2 years ago

Intellectual 365 points

Thanks Ralph

0 Chiranth Murthy over 2 years ago in reply to Ralph Jacobi

Intellectual 365 points

Hi Ralph,

That link you provided has content of migrating From GCC to SYSBIOS v6 , can you suggest me where i can migrate entire project to GCC compiler ?.

+1 Ralph Jacobi over 2 years ago in reply to Chiranth Murthy

TI__Guru*** 135135 points

Hello Chiranth,

That's the only porting guide I am aware of, and I don't have GCC expertise to provide more detail than that.

Best Regards,

Ralph Jacobi

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C129XNCZAD: Migrating firmware from TI compiler to Arm GCC compiler