AM2634: AM2634 : XIP support

BIkash

Part Number: AM2634

Hi Ti experts,

As per earlier information, AM2634 is supposed to support XIP.

As currently without XIP the program size can't go beyond ~2MB OCRAM, is it possible now to store the program on the QSPI flash and execute from there ? If not is there any alternative ?

over 2 years ago

0 Sri Vidya Gunturi over 2 years ago

TI__Expert 7586 points

Hi Bikash

Can we continue this conversation in the other XIP support thread you have raised?

Here is a similar thread for your reference:

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1098320/am2634-is-qspi-xip-supported

I will close this thread and we can continue the same discussion in the other thread.

Please feel free to comment back on this thread it any time and it will automatically re-open.

Regards

Sri Vidya

0 Sri Vidya Gunturi over 2 years ago in reply to Sri Vidya Gunturi

TI__Expert 7586 points

I have found below information on AM263P also. This is a future device which will have XIP mode support.

e2e.ti.com/.../am2634-xip-code-example

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2634: AM2634 : XIP support