- Ask a related questionWhat is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
Dear all,
Consulting F021 FLASH API reference guide (SPNU501H), it seems non-blocking erasure of the EEPROM BANK7 is possible via Fapi_issueAsyncCommandWithAddress(). Is this function really non-blocking i.e., the erasure happens in parallel within the MCU (hardware) module?
Does the same apply to writing to the EEPROM BANK7 via Fapi_issueProgrammingCommand()?
Thanks a lot for your time and support
With my best regards,
Luis
Hi Luis,
Consulting F021 FLASH API reference guide (SPNU501H), it seems non-blocking erasure of the EEPROM BANK7 is possible via Fapi_issueAsyncCommandWithAddress(). Is this function really non-blocking i.e., the erasure happens in parallel within the MCU (hardware) module?
Yes, it is a non-blocking function.
This function will just send the command for erase and after that again we have to poll for the status.
Refer TI FEE example code:
As you can see here calling the function "TI_FeeInternal_PollFlashStatus" after the "Fapi_issueAsyncCommandWithAddress" to find out whether the erase is complete or not.
Does the same apply to writing to the EEPROM BANK7 via Fapi_issueProgrammingCommand()?
Yes, same thing applicable for "Fapi_issueProgrammingCommand".
--
Thanks & regards,
Jagadish.
