TMDSEMU110-U: SEGGER J link support

Sarun Saji

Part Number: TMDSEMU110-U
Other Parts Discussed in Thread: AM2634, SEGGER

Hi, have a nice day

Is it possible to debug AM2634 with SEGGER J link?

Went through some E2E forums and observed that SEGGER j link is supported, but in target configuration this controller is not listed and some error message is being generated

tried to update J-link drivers still no progress

1 month ago

0 Aakash Kedia 1 month ago

TI__Mastermind 24614 points

Hi Sarun Saji,

Does your device manager shows a valid Jlink connected to this machine ?

0 Sarun Saji 1 month ago in reply to Aakash Kedia

Prodigy 30 points

yes, it is showing up in device manager

0 Sarun Saji 1 month ago

Prodigy 30 points

A small update, after talking with SEGGER support they explained currently AM2634 devices are not supported by J link, Is there a workaround ?

0 Aakash Kedia 1 month ago in reply to Sarun Saji

TI__Mastermind 24614 points

Let me confirm internally.

+1 Aakash Kedia 1 month ago in reply to Aakash Kedia

TI__Mastermind 24614 points

Hi,

Yes, We have confirmed and we don't support JLink Segger on AM26x device family.

Best Regards,
Aakash

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSEMU110-U: SEGGER J link support