MSPM0L1106: Factor Reset Command

user4115516

Part Number: MSPM0L1106

Hello,

During our developing for MSPM0L1106 programmer. when I using BSL Command of Factory Reset(80 01 00 30 DE 20 24 0B), after command is executed, the chip couldn't be connected again wher using SWD or BSL, Why?

Also, according to Reference, SWD could send MAS Erase command to BSL by mail box. how to operate it?

Best regrads

Alan

3 months ago

0 Zoey Wei 3 months ago

TI__Expert 5160 points

Hi,

If you use BSL to do factory reset, you must download the nonmain.

As the factory reset is done, all of the memory is changed to FF(NONMAIN is also). So you have to download default NONMAIN configuration after factory reset command.

B.R.

Zoey

0 user4115516 3 months ago in reply to Zoey Wei

Prodigy 80 points

Hello,

For this case, could the chip can been recovered? If yes, how to do that?

Best regards,

Alan

0 Zoey Wei 3 months ago in reply to user4115516

TI__Expert 5160 points

Hi,

No, the Chip cannot be connected anymore.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0L1106: Factor Reset Command