• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMDSCNCD263P: ENET Examples: PHY Loopback Example Failure

TMDSCNCD263P: ENET Examples: PHY Loopback Example Failure in DevBoot Mode

Kier
Mastermind 7895 points
Part Number: TMDSCNCD263P

Tool/software:

Following on from the related question, (+) TMDSCNCD263P: ENET Examples: PHY Loopback Example Failure - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

the loop back (PHY) example still doesn't work in dev boot mode.

Fullscreen
1
2
3
4
5
6
7
8
9
10
11
12
13
0: Internal MAC loopback
1: External PHY loopback
Enter option: 1
=============================
Enet Loopback: Iteration 1
=============================
CPSW_3G Test
EnetAppUtils_reduceCoreMacAllocation: Reduced Mac Address Allocation for CoreId:0 From 4 To 2
EnetPhy_bindDriver:1842
PHY 0 is alive
initQs() txFreePktInfoQ initialized with 16 pkts
Cpsw_handleLinkUp:1626
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

 , please confirm whether this has been fixed.

I am using CCS12.7 and MCU_PLUS_SDK_ 9.2.56.