MSPM0G1505: CCS Theia Debug Simulation Issue

Abhinav Jha

Part Number: MSPM0G1505

Tool/software:

I am new to CCS Theia, and I was working on a project related to this controller, but I was not able to debug the project in a simulation.
Is it not possible to simulate in CCS Theia as I have worked before on MPLAB IDE, and it offers that service to use a simulator to debug a project.

Please guide me through this.

Thankyou

4 months ago

0 Diego Abad Sajamin 4 months ago

TI__Genius 9782 points

Hi Abhinav,
Do you mean you can't debug your project?

Best Regards,

Diego Abad

0 Abhinav Jha 4 months ago in reply to Diego Abad Sajamin

Prodigy 25 points

As I mentioned I am not able to debug the project in a simulator environment.
If you have worked in Microchip MPLAB IDE it offers a simulator where you can debug your code.

I just want to know whether you can debug any project in CCS theia without actual hardware.

0 Diego Abad Sajamin 4 months ago in reply to Abhinav Jha

TI__Genius 9782 points

Hi Abhinav,
You should be able to build the project without any hardware connected to your computer. However, you are correct. CCS Theia currently doesn't have a "simulator" for our devices (there is a primitive version of this, but it is still in the working.)
Best Regards,
Diego Abad

0 Abhinav Jha 4 months ago in reply to Diego Abad Sajamin

Prodigy 25 points

Thank you for resolving my query. Appreciate your efforts.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G1505: CCS Theia Debug Simulation Issue