MSPM0G3507: Any changes wrt OpenOCD support?

Christian Neuwirth

Part Number: MSPM0G3507

Tool/software:

Referring to these (rather old) posts:

(+) LP-MSPM0G3507: OpenOCD configs? - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums
(+) LP-MSPM0G3507: Any support running debug outside of CCS using gdb? - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

Has anything changed in this context?

Thanks,
Chris.

7 months ago

+1 Luke Ledbetter 7 months ago

TI__Mastermind 25690 points

Hi Chris,

We are in the OpenOCD system now, you can access this git branch https://github.com/nmenon/openocd/tree/mspm0-dev for the latest version.

Regards,
Luke

0 Christian Neuwirth 7 months ago in reply to Luke Ledbetter

Prodigy 120 points

Great! Thx Luke!

0 Christian Neuwirth 7 months ago in reply to Luke Ledbetter

Prodigy 120 points

Hi Luke,

Add-on question:
You pointed me to a fork of the official OpenOCD project and the changes that bring in support for the MSPM0 are just a week old. I'm also seeing that those changes are under review wrt the official OpenOCD project.

Does that mean that we'd have to build OpenOCD from the source in the fork you pointed me to for the time being, but can expect those changes to end up in the official project and the released binaries that go along with that?

If so, do you have a feel for how long this will take?
It doesn't look like the official OpenOCD has a short release cycle :-/

0 Luke Ledbetter 7 months ago in reply to Christian Neuwirth

TI__Mastermind 25690 points

Hi Christian,

That is correct, unfortunately we don't have control over the OpenOCD flow so I don't have a timeline for its integration. But the fork I presented is the development branch the Texas Instruments MSP SW team is developing on and pulling into OpenOCD.

Looks like the fork is waiting for a couple more people to finish review before its merge.

Regards,
Luke

0 Christian Neuwirth 7 months ago in reply to Luke Ledbetter

Prodigy 120 points

Thx, Luke!