This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Other Parts Discussed in Thread: CC2650MODA, TM4C129ENCPDT, TIDM-TM4C129XBLE, TIDM-TM4C129XGATEWAY, CC2650

Hi everyone
I am making a project in which I try to make the micro TM4C129ENCPDT communicate with the BLE module CC2650MODA via UART. In the past, to send messages with an old BT2.0, I inserted the ATCommand inside the UART message; now I would like to do a similar thing with this module; I looked at various examples and searched the forum, and found here: a procedure very similar to what I would like to do.The software in question, in wich there should be the TM4C_CC26xx_Demo_Central example, is supposed to be shared in the TI Design folder:

However, the link is broken on that page so the software doesn't seem to be available.

Please advise me

Thank you