• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 256 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280270: InstaSPIN_FOC GUI issues

Yale Li 李耀先
Expert 4660 points
Part Number: TMS320F280270

Hi Team,

Here're some issues from the customer may need your help:

1. 

E:\ti\guicomposer\webapps\InstaSPIN_FOC_F2806xM          E:\ti\guicomposer\webapps\InstaSPIN_F2802xF_UNIVERSAL

Why F280270's GUI views differently from F28069?

2. 

Why there is no value, but initialization is successful? How to connect?

3. Lab 5d shows how to replace InstaSPIN-FOC speed controller with SpinTAC speed controller. For these two controller, How to judge which should be used? What's the differences?

--

https://software-dl.ti.com/C2000/c2000_apps_public_sw/motorware/exports/motorkitscncd69miso_v104.zip

https://www.ti.com.cn/tool/cn/INSTASPINUNIVERSALGUI

--

Thanks & Regards

Yale

  • +1
    TI__Guru 51175 points

    1. Are they able to connect to the device over the XDS100 in CCS? Is it only the GUI that's giving an error?

    Those are two completely different GUIs. One is MOTORKITSCNCD69MISO and the other is INSTASPINUNIVERSALGUI. There is an F2806x version of the universal GUI, but the motor kit only supports F2806x.

    2. See my questions in response to #1. Also, do note that using the GUI is not necessary to use InstaSPIN. They can get all of the same information just using the CCS Expressions window as described in the lab guide.

    3. Will need to ask a colleague to comment on this one.

    Whitney