TMS320F280049-Q1: Uniflash and its command line with multiple XDS110 for flash programming

Wayne Huang

Genius 14865 points

Part Number: TMS320F280049-Q1
Other Parts Discussed in Thread: UNIFLASH

Dear Champs,

I am asking this for our customer.

The user has used Uniflash with one XDS110 for mass production.

Now, the user is thinking to use Uniflash to connect to two or even more XDS110 for programming.

For example, if they just use two XDS110 for programming,

Does Uniflash support multiple XDS110 programming by the serial number below?

If yes, can they also do this in command line?

How do they modify the command line package to implement these?

8 months ago

0 Ki 8 months ago

TI__Guru**** 429950 points

Hello,

Wayne Huang said:
Does Uniflash support multiple XDS110 programming by the serial number below?

Typically, it does. However, there is a bug with recent UniFlash versions. Please see the below link for more details and the workaround:

https://sir.ext.ti.com/jira/browse/EXT_EP-11583

Wayne Huang said:
If yes, can they also do this in command line?

How do they modify the command line package to implement these?

They can create a new configuration in UniFlash with the serial number specified (you will need to press the "Edit" button after the device/connection has been specified). Once this is done and a new session is entered, a new command line package can be generated that will use the target configuration with the serial number specified.

Thanks

0 JohnS 8 months ago in reply to Ki

TI__Guru**** 160220 points

There is also an app note here with more information on using UniFlash with multiple boards:

https://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-uniflash_multiple_boards.html

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049-Q1: Uniflash and its command line with multiple XDS110 for flash programming