TMS320F280049C: TMS320F280049C

papana prakash

Part Number: TMS320F280049C

Hi,

I'm trying to build the CCS project using PowerShell i have gone through the below link but this one is using eclipse path and already in workspace.

https://software-dl.ti.com/ccs/esd/documents/ccs_projects-command-line.html

i want to build the project without creating the workspace by using only MakeFile which is already generated by CCS. please let me know is it possible to build the project by using powerShell with the help of makefile.

Thankyou.

2 months ago

0 Ryan Ma 2 months ago

TI__Genius 15466 points

Hi Papana,

Here is a thread that asked the same question. You will need to create a workspace.

Best,

Ryan Ma

0 papana prakash 2 months ago in reply to Ryan Ma

Prodigy 10 points

Hi Ryan,

thanks for the reply i have build the project through powerShell after creating the workspace but later i want to built the project using Makefile which is generated by CCS later onwards i don't want to use CCS workspace to build the project i just want to build the project by using only makefile is it possible.

i have seen the below link thread i understand its possible please help me out.

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/187056/command-line-build-without-importing-project-into-eclipse-workspace

thanks

0 Ryan Ma 2 months ago in reply to papana prakash

TI__Genius 15466 points

Hi Papana,

Allow me to look into this and will provide a response promptly.

Best,

Ryan Ma

+1 Ryan Ma 2 months ago in reply to Ryan Ma

TI__Genius 15466 points

Hi Papana,

You can simply call gmake directly on the generated Makefile.

software-dl.ti.com/.../ccs_project-management.html

Best,

Ryan Ma

0 papana prakash 2 months ago in reply to Ryan Ma

Prodigy 10 points

HI Ryan,

Thanks, i have successfully build the project using makefile through powershell command line tool.

Now actulay i want to try this same process in another system but in that system their no CCS IDE installed is it possible to build the project using makefile.

0 Ryan Ma 2 months ago in reply to papana prakash

TI__Genius 15466 points

Hi Papana,

I believe you can try to copy over the project to the other system, then run make on the same files.

Best,

Ryan Ma

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049C: TMS320F280049C