LAUNCHXL-F28379D: How to define CPU1 & CPU2 in project properties?

Asim Dey

Hello e2e,
When i building the ccs project file getting 12 error belong to similar issue, that i have attach here. so how to rectify it.

over 5 years ago

0 Veena Kamath over 5 years ago

TI__Mastermind 31695 points

Hi Asim,

Please go to the project properties by right clicking the project and selecting Properties. Navigate to Build -> C2000 compiler -> Predefined Symbols.
In the Pre-define NAME Tab, you can add symbols as per your need.

Regards,
Veena

0 Asim Dey over 5 years ago in reply to Veena Kamath

Expert 2195 points

Hello Veena,

I did as per you suggestion, but getting another error. kindly see my attachment.

0 Asim Dey over 5 years ago in reply to Asim Dey

Expert 2195 points

Veena,
The above problem was solved. Error occurred due to one more configuration file present inside the project folder.

Thank you Veena.

0 Veena Kamath over 5 years ago in reply to Asim Dey

TI__Mastermind 31695 points

Hi Asim,

Glad to know that you were able to resolve the issue. Thanks for posting in E2E.

Regards,
Veena

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: How to define CPU1 & CPU2 in project properties?