CCS/TMS320F28335: TMS320F28335

Hi,

Can you verify that the mentioned linker command files are available in those folders?
Also, you need not include both DSP2833x_Headers_BIOS.cmd and DSP2833x_Headers_nonBIOS.cmd. Use only one of them since both the linker command files define almost the same sections.

Regards,
Veena

6102..out error2.docx

I thank you for your replay , Here is my setting .. .out error2.docx

Hi,

Can you please verify that the path
C:/ti/C2000Ware_1_00_05_00_Software/device_support/f2833x/headers/cmd/DSP2833x_Headers_nonBIOS.cmd' is correct?

Regards,
Veena

this the the folder that I have :
C:/ti/C2000/C2000Ware_1_00_05_00_Software/device_support/f2833x/headers/cmd/DSP2833x_Headers_nonBIOS.cmd'
or

C:\ti\controlSUITE\device_support\f2833x\v142\DSP2833x_headers\cmd

when I CHANGE TO C:\ti\controlSUITE\device_support\f2833x\v142\DSP2833x_headers\/DSP2833x_Headers_nonBIOS.cmd'

STILL THE ERROR IS

gmake: *** No rule to make target 'C:/ti/C2000Ware_1_00_05_00_Software/device_support/f2833x/headers/cmd/DSP2833x_Headers_nonBIOS.cmd', needed by 'TIMER0.out'.

This the folder that I have: .out error2.1.docx

thanks

Hi,

Can you also verify that the paths given in Project Properties -> Resource->Linked Resources-> Linked Resources are updated?

Regards,
Veena

Hi,

Since we haven't heard from you for the last 2 weeks, we assume you were able to resolve the issue. I am marking this thread as resolved. If you still have issues, you may reject the resolution and reply to this thread.

Regards,
Veena

MEMORY OVERLAPPING.docxSorry , I was off from TI desk for weeks for some other tasks .

But  I am not clear    ''Can you also verify that the paths given in Project Properties -> Resource->Linked Resources-> Linked Resources are updated?'  Does it mean the Project Properties -> Resource->C2000 -> FILE SEARCH PATH?  if that is ,  i have added the links in this path. Is there  a task that i have to modify in file  ''28335_RAM_lnk.cmd''?  I have  done only add to my file!  I have similar error like this .

4111.MEMORY OVERLAPPING.docxSorry , I was off from TI desk for weeks for some other tasks .

But  I am not clear    ''Can you also verify that the paths given in Project Properties -> Resource->Linked Resources-> Linked Resources are updated?'  Does it mean the Project Properties -> Resource->C2000 -> FILE SEARCH PATH?  if that is ,  i have added the links in this path. Is there  a task that i have to modify in file  ''28335_RAM_lnk.cmd''?  I have  done only add to my file!  I have similar error like this .