CCS/LAUNCHXL-F28069M: encoder count value

Safwat Ahmed Choudhury

Tool/software: Code Composer Studio

hello,

I am currently working on lab 13b. after positition control application is there any way to access the encoder counts that my encoder made?

safwat

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 114350 points

Read the QEP position counter register (QPOSCNT) as the HAL_getQepPosnCounts() function which returns the counts you want.

0 Safwat Ahmed Choudhury over 6 years ago in reply to Yanming Luo

Intellectual 285 points

hello,

Thanks for the reply. I checked the QPOSCNT register. it is counting upto 4096 for 1 revolution and then restarting the count. is there any way to know how many times the counter is going from 0 to 4096. for example if motors position control is set to 5 revolutions then the counter would go from 0 to 4096 five times so that i can multiply 4096 x 5 to get the overall pulse edge count. is there any way to know that?

safwat

0 Yanming Luo over 6 years ago in reply to Safwat Ahmed Choudhury

TI__Guru** 114350 points

No such register to count the coming times of index from encoder, you have to write a function to count the rotation times of the motor by yourself.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28069M: encoder count value